图片展示

Home  > ODM&OEM Service


Blowing and suction cleaner


Blowing and suction cleaner blow the dust suction device can greatly improve the cleanliness of the machine, reduce the number of clean cut value and labor intensity, expand at the table, to reduce the human input.


Applicable model:

1. GH018-S high-Speed Loose Type Cone to Cone Yarn Winding Machine;

2. GH018-M High Speed Tight Cone to Cone Thread Winding Machine;

3. GH018 Z Type Six Head Yarn Oil Special Winder Machine;

4. GH018 Textile Special Electric Clearing Yarn Winding Machine;

5. GH018 A High Speed Inverted Yarn Winding Machine;

6. GH018 B High Speed Inverted Yarn Winding Machine.

图片展示
图片展示

The photoelectric projection of the side of the yarn defect is closer to the vision, and the detection signal has nothing to do with the moisture regain of the fiber. The detection head is composed of a light source, a photosensitive receiver and an optical system. The yarn, if the diameter changes, then output signal corresponding photosensitive receiver change, the signal is amplified transmission to the yarn defect identification circuit, if the yarn size reaches clear requirements, then drive circuit to drive the scissors cut the yarn, but flat yarn defects may cut leakage.

 

Applicable model:

1. GH018-S high-Speed Loose Type Cone to Cone Yarn Winding Machine;

2. GH018-D 280 Type High Speed Large Volume Bobbin Winding Machine.


Gonghong Textile Machinery Winder Manufacturer

Over the past 20 years, we have taken technological innovation as our life and strived for survival by quality.

+00 86 135-1651-0653

beckykwok@windermachine.com

Building B8, Luocun New Light Source Base, Nanhai District, Foshan, Guangdong, China

Copyright © db 2018, All Rights Reserved